91212 tkim/71504 vb tsim ta-100827 no.7680-1/6 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 svc272 varactor diode monolithic dual varactor diode for fm tunin 14v, 50na, c r =2.3, q=150, mcph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. features ? twin type varactor diode with good large-signal characteristics for fm receiver electronic tuning use ? small package permits svc272-applied sets to be compact and slim ? can be also provieded in tape reel package thereby automatic insertion is supported ? high quality factor speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit reverse voltage v r 16 v junction temperature tj 125 c storage temperature tstg --55 to +125 c package dimensions unit : mm (typ) 7019a-002 ordering number : en7680a product & package information ? package : mcph3 ? jeita, jedec : sc-70, sot-323 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking electrical connection 1 : anode 2 : anode 3 : cathode mcph3 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 12 3 0 to 0.02 v2 lot no. lot no. tl SVC272-TL-E 1 3 2
svc272 no.7680-2/6 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max breakdown voltage v (br)r i r =10 a14v reverse current i r v r =10v 50 na interterminal capacitance* c2.0v v r =2.0v, f=1mhz 44.91 49.82 pf c8.0v v r =8.0v, f=1mhz 14.07 18.55 pf quality factor qv r =2.0v, f=100mhz 150 capacitance ratio c r c2.0v / c8.0v 2.3 matching tolerance cm v r =2.0v, 8.0, f=1mhz (c max-c min) / c min 100 3.0 % note)* : capacitance value per each diode. ordering information device package shipping memo SVC272-TL-E mcph3 3,000pcs./reel pb free
svc272 no.7680-3/6 0123456789 10 2 3 5 7 2 3 5 7 1000 100 10 2 3 5 7 2 3 5 7 1000 100 reverse voltage, v r -- v q, c -- v r interterminal capacitance, c -- pf it06666 10 qualit y factor, q q (f=100mhz) c (f=1mhz) v rf =20mvrms --75 --50 --25 0 25 50 75 100 125 150 0.980 1.030 1.025 1.020 1.015 1.010 1.005 1.000 0.995 0.990 0.985 ambient temperature, ta -- c c -- ta capacitance ratio it06667 175 4v 6v v r =2v 8v 4v 6v v r =8v 2v f=1mhz v rf =20mvrms
svc272 no.7680-4/6 taping speci cation SVC272-TL-E
svc272 no.7680-5/6 outline drawing land pattern example SVC272-TL-E mass (g) unit 0.007 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
svc272 ps no.7680-6/6 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
